Cisco Layer 3 Switch Integration Script (3850/4500 SUP7-8/4500X)

This document provides scripts required to complete the installation of the NAC Solution

NAC Router Integration Script

conf t

flow record sc-record match ipv4 protocol

match ipv4 source address

match ipv4 destination address

match transport source-port

match transport destination-port

flow exporter sc-exporter

destination x.x.x.x (replace x.x.x.x with IP of NAC server and remove this comment)

source vlan x (replace x with switch management VLAN number and remove this comment)

transport udp 50001

flow monitor sc-monitor exporter sc-exporter record sc-record

ip access-list extended impulse_block permit ip any host 198.31.193.211

ip access-list extended intranet remark allow DNS

permit udp any any eq domain remark allow DHCP

permit udp any any eq bootps remark allow access to AD server

permit ip any host x.x.x.x (Replace with IP of AD server and remove this comment)

*Note – Be sure to also allow the NAC Enforcer access to the router if a VTY/SSH access-list is present on the router.

Last updated on

Was this page helpful?