Initial configuration for Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1 on local management console application

Use this procedure for Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1 Configuration Login and Network Configuration for the Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1 on the local management console application

Ensure that you completed the installation for the Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1 on the local management console application.

Prepare display screen, keyboard, and mouse physically attached to the Site Manager & Network Sensor - Bundle 3 in 1 server to serve during the configuration process

After installation, the MetaDefender OT Security Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1 on the local management console application is starting

Steps:

Input username and password for the admin default user
Click Login

After successfully logging in with the default username and password, it is necessary to reset the password. Steps:

Input new password
Input to confirm new password
Click Submit

Reset Password

Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1 Network Settings

Overview Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1 Network Settings

1. Checking Network Interface

During this step, our application will detect the Network Interface Cards (NICs) that are currently plugged into your computer. This allows our application to determine which NICs are available for use with our software.

If you have multiple NICs connected to your computer (such as a Built-in NIC, USB NIC 1, and USB NIC 2), our application will display all available NICs on the screen. To help you identify which port each NIC is connected to, you can unplug the cable and the status of the NIC will be changed to "Unavailable" in our application.

If our application fails to detect all of your available NICs, you can click the "Recheck" button in the top right corner of the screen to rescan for all NICs.

Recheck button

To use an NIC with our software, toggle the button next to its name. You can disable NICs you don't want to use.

Enable/Disable Network Interface

Click on the Save button to save the changes.

2. Select NIC Using for Site Connectivity

The purpose of this is to select a specific NIC for connecting between the Enterprise Manager and the Site Manager.

Click “Select a NIC” under “Using for Site Connectivity” to choose a specific NIC from the droplist. This list displays all the NICs we enabled earlier, and we only need to select one.

Select NIC using for Site Connectivity

3. Select NIC Using for Sensor Connectivity

The purpose of this is to select a specific NIC for connecting between the Site Manager and the Network Sensor.

Click “Select a NIC” under “Using for Sensor Connectivity” to choose a specific NIC from the droplist. This list displays all the NICs we enabled earlier, and we only need to select one.

Select NIC using for Sensor Connectivity

4. Select NIC Using for Internet (License/Auto-Update)

The purpose of this is to select a specific NIC for Internet connection to serve about activation license or auto-update. Click “Select a NIC” under “Using for Internet (License/Auto-Update)” to choose a specific NIC from the droplist. This list displays all the NICs we enabled earlier, and we only need to select one.

Select NIC using for Internet (License/Auto-Update)

5. Select NIC Using for Web Access

The purpose of this is to choose a specific NIC to access the MetaDefender OT Security web administration portal using the URL that corresponds to the IP address of that NIC.

Click “Select a NIC” under “Using for Web Access” to choose a specific NIC from the droplist. This list displays all the NICs we enabled earlier, and we only need to select one.

Select NIC using for Web Access

6. Select NIC using for scanning

You can set up discovery settings for each NIC by selecting either "Passive discovery" or "Smart active discovery". The system will do the scanning based on the network configuration for NICs that you set up (for both active and passive scanning). Particularly:

Passive discovery: This setting allows the NIC to receive packets from Switch. This is useful for monitoring network traffic without disrupting it. Passive discovery requires the selected NIC to be connected to the SPAN (mirror) port of the switch. We recommend the users use built-in NIC for passive scanning to have better performance.

Select NIC for Passive Discovery

Smart active discovery: This setting sends packets to probe the network and discover other devices. This is useful for identifying network topology and detecting potential issues. The NIC for Smart active discovery is recommended NOT to be connected to the SPAN (mirror) port of the switch.

Select NIC for Active Discovery

###

Select NIC using for Patch Management

This aims to select a specific NIC for Integrated patching capabilities for firmware from Siemens vendor to streamline updates and manage vulnerabilities.

Click “Select a NIC” under “Using for Patch Management” to choose a specific NIC from the droplist. This list displays all the NICs we enabled earlier, and we only need to select one.

Select NIC using for Patch Management

8. Configure Network Interfaces

In this step, you can access and configure a list of available network interfaces (NICs). To configure a NIC, click on the “Edit” button to access the configuration options of the NIC selected in the previous steps.

Click on the “Edit” button to access the configuration options.

By default, the option is Auto (DHCP), In case your system has a DHCP server, just enter additional DNS.

Then click the Apply button to save the changes.

Config Auto(DHCP) for NIC

For optimal performance, static IP addresses are recommended. Therefore, we should switch to Manual configuration.

Config Manual for NIC

Please enter the required details - your address, netmask, gateway, and DNS, in the provided fields. After entering all the details, click on the "Apply" button to save the changes.

Finally, save your configuration, simply click on the Save button located at the top right corner of the screen.

Click on the Save button to save the configuration

Network Connectivity - Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1 and Site Manager/Network Sensor communication

*Note: Make sure to select the matching communication model between all components involved: Enterprise Manager & Site Manager & Network Sensor - Bundle 3 in 1, Site Manager, and Network Sensors. This ensures consistent and reliable communication across the system.

1. Enterprise Manager and Site Manager communication

Model #1. Bi-directional (from Site to Enterprise and vice versa)

Two-way (inbound + outbound) communications between components

Model #2. Uni-directional (only from Site to Enterprise)

One-way (outbound) communication to the upper component.

2. Built-in Site Manager & Network Sensor communication

Model #1. Bi-directional (from Sensor to Site and vice versa)

Two-way (inbound + outbound) communications between components

Model #2. Uni-directional (only from Sensor to Site)

One-way (outbound) communication to the upper component.

Time Settings

Configuring the system time can be done using two methods: manual time setting and synchronizing time via an NTP (Network Time Protocol) server. You can choose the most suitable option based on your system’s requirements.

1. Manual Time Setting

In this method, users can manually set the system's time and select the appropriate timezone.

Steps to Configure Time Manually:

Click to Select Manual

Select Timezone:

Look for the Timezone dropdown or field.
Choose your desired time zone from the list of available options. For example, you can select Asia/ Ho Chi Minh, etc.

Once you’ve entered the correct timezone, click on the Apply button to store your changes.

Manually Set the Date and Time if it is not correct.

Click on “Click here” to open the Change system Time popup:

Then click “Add system time”:

In the Date and Time fields, manually input the current date and time.

Date Format: Typically follows YYYY-MM-DD (e.g., 2024-08-29).
Time Format: The time format follows the pattern HH:MM:SS (e.g., 11:01:19) using the 24-hour clock format.

Save the Settings: Once you’ve entered the correct date, time, and timezone, click on the Save button to store your changes.

Verify the Changes: Ensure that the system reflects the correct date, time, and timezone on the interface.

2. NTP Servers

NTP (Network Time Protocol) is a protocol designed to synchronize the clocks of networked devices to a global standard time, usually via online servers. This method ensures that the system time is accurate and automatically updated.

Steps to Configure NTP Server:

Click to select NTP Servers:

Input NTP Server Address:

You will be prompted to input an NTP server. Examples of commonly used NTP servers are:

pool.ntp.org
time.google.com
time.windows.com

Enter the preferred NTP server URL or IP address into the NTP Server field.

Apply the Settings:

After entering the NTP server information, click the Save button to store the settings.

The system will now synchronize its time with the NTP server at regular intervals.

Verify NTP Synchronization:

Check the system time to ensure it matches the correct time after synchronization.

Last updated on

Was this page helpful?